Dual Function Bottle Filler 1/2 in OD Spring or Springless

(No reviews yet) Write a Review
MSRP: $7.99
Price: $4.99
(You save $3.00 )
SKU:
BSG5403
UPC:
5.39224E+12
Shipping:
Calculated at Checkout

Product Overview

This 1/2 in OD Spring or Springless Dual Function Bottle Filler is the perfect size. At 14" long, it is long enough to fit most bottles and can be used with or without the spring.

Takeout spring bottle fillers allow you to use either with the spring, for automatic shutoff when you lift the tube, or as a springless filler that fills automatically when t he tube is set down in a botttle. Use with 7/16 or 1/2 in tubing.

It can be unassembled for easy cleaning.

Bear in mind that it is important to check from time to time that the bottle filler body (white part) is fully attached to the acrylic tube.

This product is not resistant to high levels of alcohol. Do not sanitize with alcohol.

Acrylic is safe for long exposure to ABV (alcohol by Volume) up to 15%. It is safe up to 30% ABV for short periods of time (10 minutes or so). Not safe to expose acrylic to more than 30% ABV. Exceeding those limits will damage the Acrylic and could potentially leach into liquid. If you need to exceed this limits, please use a different product.

  • BPA Free

Maximum Temperature: 60 °C (140 °F).


Cleaning Tips for the Stainless Steel Spring:
  • Don't use chlorine or any sanitizing solution that contains chlorine.
  • Don't forget to rinse residue from cleaning solutions. They can stain or damage the finish.
  • Towel-dry the product after rinsing.
  • Gritty or hard water can stain the product.

What does this bottle filler have that the rest don't? A removable tip and spring that make this model easily sanitized. Plus, the spring inside can be removed if you prefer the action of a springless bottle filler. The actual "wand" on the filler is 15 inches long.

Takeout spring bottle fillers allow you to use either with the spring, for automatic shutoff when you lift the tube, or as a springless filler that fills automatically whent he tube is set down in a botttle. Use with 7/16" or 1/2" in ID plastic tubing. (We recomend 7/16")

Reviews

(No reviews yet) Write a Review