March Pump TE-5.5S-MD; 1" FPT Inlet/ 3/4" MPT Outlet; 115/230V


$ 1,735.45 $ 1,889.38
Write a review
| Ask a question

March Pump's industrial TE-5.5S-MD Model 0151-0002-0100 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 30 gallons per minute at 11 feet, and its maximum head is 41 Feet (or around 18PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1 inch female pipe thread, and the outlet is 3/4 inch male pipe thread. The standard motor is a 1 Phase 115/230V  0.33 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-5.5S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
    • 1" FPT Inlet/ 3/4" MPT Outlet
    • 1/3 hp; 3450 RPM; 4.4/2.2 Amps, 115/230V 50/60hz.
    • Max Flow 60Hz {30 gpm} - 50Hz {102 lpm}
    • Max Head 60Hz {41 ft / 17.7 psi} - 50Hz {9 m}
    • Materials In Contact With Solution: 316 Stainless Steel, Viton, Ceramic, Carbon

    Perfect for Applications Including

    Applications for the TE-5.5S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners. 

    Great for Chemicals Including

    The TE-5.5S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.  The TE-5.5S-MD may have been modified to handle these chemicals.  Please contact March Pump to review your application before using the TE-5.5S-MD for any of the above listed chemicals.

    DESCRIPTION: Series 5.5 are centrifugal magnetic drive pumps, eliminating the need for a shaft seal. Pumps can be serviced with a screwdriver. Screws should be tightened in sequence and uniformly. Do not over tighten the screws or you may crush the plastic housing bosses.

    TE-5.5-MD pumps are 115/230V, 1 phase, TEFC. OPERATION: Pumps are not self-priming, lack a suction lift, and thus require a flooded suction. Pumps cannot be run dry because the impeller requires the liquid being pumped for lubrication. The direction of motor rotation should be clockwise when facing the inlet of the pump. For liquids with a specific gravity greater than water, have a higher viscosity, or for elevated temperatures, a trimmed impeller may be necessary. For application assistance, contact March Pump.

    Unit System 60Hz 50Hz
    Max Flow 30 GPM 102 LPM
    Max Head 41 FT 9 M
    Power .33 HP .248 KW
    Electrical 1PH 115/230V 
    Type Centrifugal Mag Drive
    Inlet 1"FPT
    Outlet 3/4"MPT
    Wet End 316 Stainless Steel (Front and Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)

    Tags: All-Grain Equipment | High-Temp Pumps | Pumps |